The Phototool film(artwork
film, working film), which carries the circuit layout to be
etched into the PCB, can be contaminated with particles during
production, storage, or by handling.
These particles may corrupt the final image exposed onto the
Photoresist film, and eventually cause board rejection or
failure.
It should also be laminated with protection film (Phototool
protection film) to prolong their usage / life and to ensure
consistently accurate photo-imaging.
The adhesive on this tape must be UV stable as well as:
| • |
Ultra-thin and extremely precise tape |
| • |
High durability |
| • |
High transparency |
| • |
Easy to peel and re-apply just after lamination |
| • |
Non-sticky surface |
|
Product Type
|
Base
Material
|
Adhesive
Thickness |
Features |
Usage |
| PL08H |
PET 6㎛ |
2 ㎛ |
Clear type, PL08H has high durability
caused by its hard coating layer |
High Durability type |
| PL10H |
PET 6㎛ |
2 ㎛
|
Clear type, PL10H has high durability
caused by its hard coating layer |
High Durability type |
| PL08A |
PET 6㎛ |
2 ㎛ |
Clear type, PL08A has an anti-static
feature. It prevents dust sticking |
Anti-static type |
| PL10A |
PET 6㎛ |
2 ㎛ |
Clear type, PL10A has an anti-static
feature. It prevents dust sticking |
Anti-static type |
| PL08XM |
PET 6㎛ |
2 ㎛ |
Matte type, PL08XM has release feature.
So, It can be used with liquid PR without any contamination. |
Non-sticking type |
| PL10XM |
PET 6㎛ |
2 ㎛ |
Matte type, PL10XM has release feature.
So, It can be used with liquid PR without any contamination. |
Non-sticking type |
| Properties of Major Products |
| Properties |
Unit |
PL08H
|
PL10H |
PL08A |
PL10A |
PL08XM |
PL10XM |
General
Thickness
|
㎛ |
8.0
|
10.0
|
8.0 |
10.0
|
8.0
|
10.0 |
Optical
Hz(Haze)
TT(Total transmittance)
DF(Diffusion)
PT(Parallel transmittance)
|
%
%
%
%
|
4.2
91.0
3.1
87.4
|
4.3
90.8
3.2
87.2
|
4.1
90.6
3.1
87.5
|
4.5
90.4
3.1
87.3
|
5.9
92.6
5.0
87.6
|
6.1
92.1
5.0
87.1 |
Mechanical
Tensile strength MD
TD
Elongation MD
at break TD
|
Kg/㎟
% |
26
30
120
100 |
26
30
120
100
|
26
30
120
100
|
26
30
120
100
|
26
30
120
100 |
26
30
120
100 |
Thermal
Heat shrinkage MD
TD
|
% |
2.0
0.4
|
2.0
0.4
|
2.0
0.4
|
2.0
0.4
|
2.0
0.4
|
2.0
0.4 |
Adhesion
force
Peel force
|
gf/inch |
250 ↑ |
300 ↑ |
250 ↑ |
300 ↑ |
250 ↑ |
300 ↑ |
Release
force of
Top coat layer (peel force)
|
gf/inch |
45
|
45
|
- |
- |
5 |
5 |
Anti-static
Properties
Surface resistance
|
Ω/□
|
1014
|
1014 |
109 |
109 |
1014 |
1014 |
Alcohol
resistance
|
|
good
|
good
|
- |
- |
good
|
good
|
* The data above is for reference only, and is not guaranteed.
|
